Products

Shearpin and clips for the #1 Rigid Shank Pre-1988 Assembly. The shearpin has a 25.4mm diameter and is 120mm long with a 67mm shear section. Suppli...

Shank Carrier for the #1 Rigid and Hydraulic Shank Assemblies (pre-1988/shearpin models only). See 120-0002 for the complete assembly.  Old Part No...

Helper Bar for the #7 spring jump assembly. Old Part No. 125-036001-407

Hinge plate for the #7 spring jump assembly. Old Part No. 001-302

Spring bar for the #7 spring jump assembly. Old Part No. 125-036

Clamp plate for the #8 Rigid Shank Assembly (120-0006). Mounts to 100x100mm (4x4") RHS frame. *Old Part No. 002-201

Shank carrier for the #8 Hydraulic Shank Assembly. Mounts to 100 x 100mm RHS frames. *Old Part No. 005-102

Shearpin to suit the #8 and #8-9 Hybrid Rigid Shank Assemblies. Shearpins provide a substantially higher breakout than hydraulic breakout machines ...

Shearpin to suit the #8 and #8-9 Hybrid Rigid Shank Assemblies. Shearpins provide a substantially higher breakout than hydraulic breakout machines ...

Shearpin to suit the #8 and #8-9 Hybrid Rigid Shank Assemblies. Shearpins provide a substantially higher breakout than hydraulic breakout machines ...

Shearpin to suit the #8 and #8-9 Hybrid Rigid Shank Assemblies. Shearpins provide a substantially higher breakout than hydraulic breakout machines ...

Shinguard to suit 24" #8 Shank. This shinguard comes with additional hardfacing to reduce wear and extend the working life of the shinguard. For a ...

Shinguard to suit 24" #8 Shank. This shinguard primarily suits customers that do their own hardfacing.For a hardfaced wear-resistant shinguard, cli...

Shinguard to suit 30" #8 Shank. Available with additional hardfacing to reduce wear and extend the working life of the shinguard.  Old Part Numbers...

#8 Hybrid rigid 100x100 Shank Assembly with coulter assembly #8-9 Hybrid Shank Assembly AP11, AP31: PartsManual_UC_8-9HybridShank_1910

The #9 blade is unique to Agrowplow and is the superior ripping blade for your plough. This GP blade comes with 3 x heavy-duty rock teeth across th...

Hardened pin utilised on the #9 shank hydraulic recoil assembly. The 2 x 7/16" rollpins provided can be installed using the 7/16" punch. Alternate ...

Shank for the #9 Inversion Shank Assembly. The inversion shank is designed to lift soil from the bottom of the working depth up toward the surface....

Suits the original #9 Hydraulic Recoil assembly (but not the #9v2). Secures the top of the cylinder with a lynch pin 140-0041 and a hairclip 141-00...

30mm diameter pin to secure the top of the hydraulic cylinder in the #9v2 shank assembly. Suits the Hydraulic Cylinder 3" Bore (153-4217).

Shearpin and clips to suit the #9 Rigid Shank Assembly. This shearpin is suitable for the AP71, AP72, AP81, AP91 and AP92 model rigid shank assembl...

Shearpin and clips to suit the #9 Rigid Shank Assembly. This shearpin is suitable for the AP51 model or 150x150mm RHS Rigid Shank Assemblies and ha...

Shear pin and clips to suit the Econo Rigid shank assembly. Fits the 4"x4" Econo Rigid Shank carrier 004-3001. *Old Part No. 141-017

These Agrowplow stroke controllers are spring-loaded for easy installation and have nylon rods inserted, designed to protect the cylinder rods from...

These Agrowplow stroke controllers are spring-loaded for easy installation and have nylon rods inserted, designed to protect the cylinder rods from...

This accumulator clamp suits both 10L and 20L accumulators. Alternate Part No.154-488  

This sub-assembly fits the 400 Pasture Disc and the V slice opener, also known as the Agrowdisc. It includes the bearing, bearing housing, retainin...

This sub-assembly fits the 400 Pasture Disc and the V slice opener, also known as the Agrowdisc. It includes the bearing, bearing housing, retainin...

These Agrowplow stroke controllers are spring-loaded for easy installation and have nylon rods inserted, designed to protect the cylinder rods from...

RHS mounting plate clamping bracket.

RHS mounting carrier for 251 spring tyne and 401 disc assembly.

Fits the 401 disc and 251 tyne, this component centralized the bottom of the spring on the spring stem.

Engineering plastic locator for the spring of the 251 spring tyne assembly and 401 disc assembly.

Part of the 401 disc and 251 tyne assemblies, this component fits on the spring stem and secures the end of the spring.

This retaining washer fits the top of the spring stem in the 401 disc and 251 tyne assemblies.

Part of the spring stem of the 401 and 251 disc assemblies. This part fits at the top of the spring stem and fits under the rubber cushion.

This spring tension bar fits in the 401 double disc and 251 tyne assemblies. It secures the spring to the mounting carrier and the swing arm.

Spring tension bar for the 401 disc and 251 tyne assembly. This tension bar was specific to early production and has since been upgraded to 408-413...

Fitting into the 251 tyne assembly, part secures the spring stem into the swing arm.

Swivel pin which secures the carrier to the swing arm on the 401 disc assembly and the 251 tyne.

The 251 Spring Tyne Assembly suits the Agrowdrill AD730 and is a dependable and cost-effective undercarriage for a range of sowing applications. Th...

Seed tube delivery for the 251 tyne assembly. First seed tube.

251 tyne assembly arm.

Bolt your tyne assembly onto your seed drill toolbars with the tyne clamp kit. Comes with Tyne clamp, bolt kit and wedge. Used in the 325, 425 and ...

Baker boot point for the 325 Coil Tyne Assembly. The popular baker boot produces an inverted 'T' groove - an ideal micro-climate for seed germinati...

Second seed tube to suit the 325 Coil Tyne Assembly. Mounts to the rear of the primary seed tube (114-3213). Fits 38mm barflo hose.