Products

Don't brave the Australian cold winters without the proper headwear. Good for winter, spring or autumn. Perfect for those early morning starts on t...

An Agrowplow denim baseball trucker cap with a Medium Profile Crown. This cap is coloured Agrowplow blue and has 2 colour bands around the back: g...

Nothing beats a warm, good-quality hoodie. This Agrowplow branded mid-weight unisex supply hoodie is made of 80% cotton and 20% polyester anti-pill...

Toolbox to be attached to a plough, contains spare parts for a plough.

Rear tow hitch for the Agrowplow AP11. A rear tow hitch enables trailing machines to be hitched to the rear of the seed drill, including the Rubber...

  The rear tow hitch allows trailing implements to be hitched safely to the rear of the ripper and provides the facility for it to be connected via...

Baker boot point for 425 Coil Tyne assemblies. The popular baker boot produces an inverted 'T' groove in the soil, creating an ideal micro-climate ...

Baker boot point to suit the 700 Coil Tyne Assembly. The popular Baker Boot produces an inverted 'T' groove - an ideal micro-climate for seed germi...

Uses 118-4364P sprocket pivot part 10B 36T 10B 36T for assembly 118-4364 sprocket pivot assembly 10B 36T 10B 36T.

This flanged bearing housing is used to secure the 25.4mm spherical bearing to the Agrowdrill. Two are used per bearing assembly and are commonly f...

Bearing Housing, suits bearing 138-1033.

This flanged bearing housing is used to secure the 20mm spherical bearing to the Agrowdrill. Two are used per bearing assembly and are commonly fou...

Two-piece bearing housing used to secure the 20mm spherical bearing to the Agrowdrill. Commonly found on the original Agrodrill and older models.Th...

Bearing housing to suit bearings with outer diameter of 52mm, as found on the 15 notch disc assembly. Fits 138-3025

Two-piece bearing housing used to secure the 25.4mm spherical bearing to the Agrowdrill. Commonly found on older Agrowdrill models.The distance bet...

Fabricated bearing housing for 14" coulter discs. Suits bearings with 62mm outer diameter. *Old Part No. 138-030

Bearing mounting, suits bearing 115-7004. Used on trailing Flexirollers up to 5m working width. *Old Part No. 138-052

Bearing with ID 5/8" and OD 52mm. Mounts into 110-4112 bearing housing. *Old Part No. 138-325

Imperial bearing. Internal diameter suits 1" shaft (25.4mm) and outer diameter fits into 2.1/4" hub (57.2mm).

This spherical bearing suits a 25.4mm shaft, and fits into 52mm spherical bearing housing. The two common housings used to secure this bearing on t...

This spherical bearing suits a 20mm shaft, and fits into 47mm spherical bearing housing. The two common housings used to secure this bearing on the...

Sealed bearing, fits on a shaft 25mm and into hub or housing of 62mm in diameter. ID 25mm, OD62mm. Cylindrical. *Old Part No. 138-031

Sealed bearing, fits on a shaft 50mm and spherical bearing housing of 90mm diameter. See 138-0052 for housing. Used for trailing Flexirollers up to...

Holds a 60mm shaft, fits into a 110mm spherical bearing mount, 138-1032 *Old Part No. 138-142

Sealed bearing, fits onto a 60mm shaft and is pressed into a machined sprocket or housing of 78mm in diameter.  Commonly utilised in JPC2000 Wheel ...

Suits bearing housing, 138-0053

This bearing spacer punch is made from a 60mm Gr4140 shaft and is used to replace/install spherical bearings on the #9 Hydraulic Swingarm. Alternat...

The Spherical Bearing is used on the #9 hydraulic Swing Arm and is Teflon-lined for grease-free maintenance. It has an OD of 62mm and an ID of 40mm...

Blade to suit #1 Shank. This blade requires the use of the #1 Blade Adaptor to attach to the Shank. This blade comes plain with no wear-reducing en...

Blade to suit #1 Shank. This blade requires the use of the #1 Blade Adaptor to attach to the Shank.It has been hard-faced on all leading edges and ...

Blade to suit #1 Shank. This blade requires the use of the #1 Blade Adaptor to attach to the Shank.It comes with 4 x tungsten tiles across the lead...

Blade Narrow to suit the #7 Shank. The narrow blade does not use a blade adapter but fits directly to the shank and is supplied with the required h...

Blade Narrow to suit the #7 Shank. The narrow blade does not use a blade adapter but fits directly to the shank and is supplied with the required h...

Blade Narrow to suit the #7 Shank. The narrow blade does not use a blade adapter but fits directly to the shank and is supplied with the required h...

Blade to suit #7 Shank. This blade requires the use of the #7 Blade Adapter to attach to the Shank. A knock-on tool for the safe installation of th...

Blade to suit #7 Shank. This blade requires the use of the #7 Blade Adapter to attach to the Shank. A knock-on tool for the safe installation of th...

Blade to suit #7 Shank. This blade requires the use of the #7 Blade Adapter to attach to the Shank. A knock-on tool for the safe installation of th...

Heavy-duty blade to suit the #8 shank.This GP blade comes with 3 x heavy-duty rock teeth across the leading edge of the blade as well as additional...

Heavy-duty blade to suit the #8 shank.This GP blade comes with 3 x heavy-duty rock teeth across the leading edge of the blade as well as additional...

Heavy-duty blade to suit the #8 shank.This blade comes plain with no wear-reducing enhancements designed to protect and prolong the life of the bla...

Heavy-duty blade to suit the #8 shank.This blade comes with beefed-up tungsten grit hard facing designed to protect and prolong the life of the bla...

The #9 blade is unique to Agrowplow and is the superior ripping blade for your plough. This GP blade comes with 3 x heavy-duty rock teeth across th...

The #9 blade is unique to Agrowplow and is the superior ripping blade for your plough. This GP blade comes with 3 x heavy duty rock teeth across th...

Blade for the #9 Inversion Shank Assembly. The blade is made from bisalloy metal and includes tungsten hardfacing for additional durabiltiy in hars...

The #9 blade is unique to Agrowplow and is the superior ripping blade for your plough. This Tungsten H/F Blade has been hard-faced on all leading e...

This blade adaptor comes with accompanying hardware and enables the user to secure a heavy-duty #8 blade onto a #1 Shank. To install, remove the pr...

Blade Adaptor for the #7 Shank. Required in attaching the wider #7 Blades listed below onto the shank.Castings may have "#17" stamped on them. Othe...